Quick Answer: Why Does My Printer Not Recognize My Ink Cartridge?

How do I clear an error on my HP printer?

To temporarily clear the error, reset the printer.With the printer turned on, disconnect the power cord from the printer.Unplug the power cord from the power source.Wait 60 seconds.Reconnect the power cord to a wall outlet and to the printer.

note: HP recommends plugging the printer directly into a wall outlet..

How do I clear the ink error on my HP printer?

How to Clear an HP Check Printer Cartridge Error CodeTurn on the printer and open the cover where the ink cartridge is located. … Place the ink cartridge back in the carriage. … Turn the HP printer on. … Turn on the printer and open the cover where the ink cartridge is located. … Remove the cartridge and use a clean, lint-free, dry cloth to gently wipe the contacts.More items…

How do I get my printer to recognize ink cartridges?

Check the copper banding on each of the cartridges. This is their contact chip and what communicates with the printer. Give them each a gentle wipe with a cloth or pencil eraser to ensure they are clean and dust free. Reinstall the cartridge to your machine and restart the printer, this should clear the error.

Why is my printer saying no ink when there is?

This error occurs due to the chip on your cartridge still reporting a low or empty ink level from it’s previous use. The chip itself cannot be reset, so when the cartridge is refilled and then installed into a new machine it will still register as empty.

Is there a reset button on ink cartridges?

After removing the printer cartridges, examine the end of a cartridge where the copper contacts are found. On some models, there is a reset button located above the contacts in the center. … After resetting each cartridge, you can then replace them and the printer should accept them as if they were new.

How do I reset my HP ink cartridge?

Method 2: A full reset of the printer should also do:Remove the cartridges and unplug the printer.Hold the power button on for 30+ seconds. Then release.Plug in printer and reinstall cartridges one at a time.Nov 1, 2016

How do you bypass a missing ink cartridge?

To bypass your toner or ink chip you can do any of four things.Use an auto-reset ink tanks if your printer models have them.Fit your printer with a new chip or ink tank.Use your printer model’s chip resetter to restore the “empty” chip to full.Disable your ink or toner monitor.

Why won’t my printer print after I changed the ink?

Verify the ink cartridge(s) has been inserted properly. If a lever has been changed from its original position to allow the installation of ink cartridges, ensure it has been returned to its original position. Perform a head cleaning on printer if available. Try resetting the ink cartridge counter.

How do I fix the ink cartridge jam on my HP printer?

SolutionStep one: Turn the All-in-One off and on again. … Step two: Clear any paper jam. … Step three: Make sure that the print carriage can move freely. … Step four: Remove the print cartridges.Step five: Reinstall the print cartridges. … Step six: Make sure the control-panel faceplate is correctly installed.More items…

How do I get my HP printer to recognize ink cartridges?

Why are the Ink Cartridges not detected?Remove the new ink cartridge from the printer.Turn off your HP printer and detach its power cord for 10 minutes.Reconnect the power cord but don’t turn on the power button just yet.Reload the new ink cartridge back into the printer.Dec 29, 2020

Why does my HP printer says Cartridge error?

Check/Wipe Cartridge Contacts: A common cause of the “Cartridge Problem” message is the gold contacts found on an electonic chip on the body of the HP cartridge being obscured with dirt/ink or even physically having been damaged. Firstly remove the indicated cartridge from the printer and locate the chip.

How do you fix a low ink warning?

If the ‘Low Ink’ warning appears, carefully remove the ink cartridge from the printer and slowly reinstall it. If the low ink level still shows, carefully remove the cartridge and close the cover. Power off the printer, unplug it and leave it off for 2 minutes.