- How do I reset my HP printer?
- Why does my printer keep telling me to load paper?
- How do I change the roller on my printer?
- How do I clean the inside of my printer?
- How do I clean the feed rollers on my printer?
- How do I clean my HP printer rollers?
- Why is my HP printer squeaking?
- Why does my printer have black smudges?
- Why does my HP printer keep saying no paper?
- Why is my printer not taking paper straight?
How do I reset my HP printer?
To restore your HP printer to factory-default settings, follow these steps.Turn the printer off.
Disconnect the power cable from the printer for 30 seconds and then reconnect.Turn the printer on while you press and hold the Resume button for 10-20 seconds.
The Attention light turns on.Release the Resume button.Feb 12, 2019.
Why does my printer keep telling me to load paper?
Follow these steps to check the condition of the paper. Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper feed issues. Follow these steps to clean the rollers inside the printer and in the duplexer. Follow these steps to reset the printer, and then print a self-test report.
How do I change the roller on my printer?
Changing the pickup rollerTurn the printer off, and then unplug the power cord from the printer. … Open the print cartridge door, and remove the print cartridge. … Find the pickup roller. … Release the small, white tabs on either side of the pickup roller, and rotate the pickup roller toward the front.More items…
How do I clean the inside of my printer?
To clean your printer, you need rubbing alcohol, a cotton swab, a vacuum cleaner or canned air, and a clean cloth. If you see streaks or the paper is smeared, clean the platen or roller to remove built-up ink. Then use the vacuum cleaner or canned air to remove any remaining ink or dust particles from the printer.
How do I clean the feed rollers on my printer?
Cleaning the paper feed rollersTurn off the all-in-one and unplug the power cord.Remove the rear access door.Clean each roller using a clean lint-free cloth lightly moistened with water (distilled water preferred).Rotate the rollers to clean the entire surface.More items…
How do I clean my HP printer rollers?
Clean the pickup rollerUnplug the power cord from the product, and then remove the pickup roller.Dab a lint-free cloth in isopropyl alcohol (or water), and then scrub the roller. … Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.More items…
Why is my HP printer squeaking?
The noise can be caused by any one of the following: A piece of paper is stuck on one of the rollers inside the printer. A roller in the toner cartridge may be squeaking. A roller on a paper feed option may be squeaking.
Why does my printer have black smudges?
Black lines and smudges on printed output can be due to dirty printers. The accumulation of dirt, dust, or toner on a printer’s rollers or transfer belt can leave tracks on the page when the paper moves through the printer. … That will leak toner onto the printer and paper, which leaves black marks on the printed output.
Why does my HP printer keep saying no paper?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Why is my printer not taking paper straight?
A paper feed issue can occur for several reasons, such as dusty or contaminated paper rollers, the condition of the paper in the tray, or even issues with the software. To resolve the issue, try each solution in this document, and then use the steps in this section to print a self-test report.