Question: Why Won’T My Printer Print After I Changed The Ink?

How do I reset my HP printer?

To restore your HP printer to factory-default settings, follow these steps.Turn the printer off.

Disconnect the power cable from the printer for 30 seconds and then reconnect.Turn the printer on while you press and hold the Resume button for 10-20 seconds.

The Attention light turns on.Release the Resume button.Feb 12, 2019.

What do I do when my printer is printing blank pages?

What to do if your Printer is printing Blank Pages?Fix # 1 – Restart your Printer.Fix # 2 – Resolve Ink / Toner Cartridges Problems.Fix # 3 – Unclog the Print head (Automatic Cleaning)Fix # 4 – Unclog the Print Head (Manual Cleaning)Mar 1, 2021

Why does my HP printer say there’s no ink?

Sometimes an ‘Ink Alert’ or ‘Low on Ink’ message displays on the computer or the printer control panel and the printer does not print. The message is intended as a warning so you can have a replacement cartridge available and avoid possible printing delays.

How do I reset my HP ink cartridge toner?

How to Reset HP Toner Cartridge ChipsSwitch the printer off.Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. … Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing.More items…

How do I troubleshoot my HP printer?

Download HP Print and Scan Doctor.Run HPPSdr.exe from the download location on your computer.Once HP Print and Scan Doctor is open, click Start, and then choose your printer. … Depending on the problem, click either Fix Printing or Fix Scanning.Test results are displayed with icons.

Why is my printer printing blank pages when it has ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. … Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

Why is my HP printer printing blank pages when it has ink?

There are a few things that could be the cause of this problem, including: – Empty ink or toner cartridges that need replacing. – Ink or toner cartridges that have become dislodged from their proper place. – The wrong paper size loaded in the input tray.

How do I reset my HP printer after refilling ink?

Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. Repeat this step five times so that the HP cartridge identification information will be erased from the printer’s memory.

Why won’t my printer read my ink?

Try replacing the old cartridge with the new one and see if the printer will recognize the cartridge. If that doesn’t work, remove the new cartridge and place it in a safe place and surface so there won’t be further damage. Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes.

Is there a reset button on HP printers?

The control panel will display SELECT LANGUAGE. Press (Down Arrow) button until control panel displays COLD RESET. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.

How do I fix my ink cartridge not recognized?

Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty) Install one of the new cartridges. Keep installing the new cartridges one-by-one until the error returns.

Is there a reset button on ink cartridges?

After removing the printer cartridges, examine the end of a cartridge where the copper contacts are found. On some models, there is a reset button located above the contacts in the center. … After resetting each cartridge, you can then replace them and the printer should accept them as if they were new.

Why won’t my HP printer print after I changed the ink?

Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. … After running the cleaning cycle, print a test page to determine whether the printer can print again.

How do I fix the color problems on my HP printer?

Change the color optionsFrom the software program, select the Print option.Select the product, and then click the Properties or Preferences button.Click the Paper/Quality tab.In the Color section, select Black & White or Color. note: … Click the OK button to close the Document Properties dialog box.

How do I fix my HP printer that prints blank pages?

5 simple fixes to try:Check ink cartridges.Run the Windows printer troubleshooter.Update the printer driver.Download and run HP Print and Scan Doctor.Configure Print Spooler service.Dec 31, 2020

How do I clean a blocked nozzle on my HP printer?

Wipe the nozzles inside the printer with a cotton swab and alcohol or ammonia to remove any dry ink that might have clogged in there. Allow everything to dry, then put the cartridges back in. Print a test page. If your test page still shows gaps in ink, clean the cartridges again.

How do you unclog a print nozzle?

If they’re on the cartridge, and the cartridge is mostly empty, you can just replace it. The new nozzles will obviously be unclogged. Seriously clogged nozzles can be cleared with some isopropyl alcohol and another run through the clean cycle.

What to do if HP printer is printing blank pages?

To resolve this issue, use only genuine HP cartridges. Additionally, you can remove the black cartridge to print only with the tri-color cartridge, replace any empty or defective cartridges, or clean the printhead.

Why is my HP printer not printing anything?

SOLUTION 1: Check HP Printer Status 1) Make sure your HP printer has enough paper in the paper tray. If there is paper then make sure none of it is stuck or jammed in the paper feed. … New HP printers will easily display the ink levels or if there is an ink issue on the front screen of the HP printer.

How do I bypass HP ink depleted?

How to Override Empty HP Ink CartridgesTurn off the HP printer by pressing and holding the “power” button.Turn the HP printer back on by pressing the power button and allowing it to run through its setup procedure.Install the refilled ink cartridge by opening the access door on the HP printer.More items…