Question: Why Does My HP Printer Say Print Cartridge Problem?

Why does my printer say ink is empty?

This error message is usually the result of a cartridge that is not firmly seated in its designated slot.

If a new cartridge is installed before the printer driver resets, there is a chance that the printer may think that the old empty cartridge is still being used..

Why won’t my HP printer print after I changed the ink?

Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. … After running the cleaning cycle, print a test page to determine whether the printer can print again.

Why is my printer connected but not printing?

The printer you plugged in to a USB hub on a system with too many peripherals to accommodate a direct connection may refuse to work that way. … Shut down the printer and restart to reset on the printer end. If that is not the issue, check the connection at your wireless router and reset the router as well.

How do I reset my HP printer?

1 Restore DefaultsFrom the screen on your printer, navigate to Setup.Tap Tools.Tap Restore Defaults.Tap Yes.The printer will restart.Once restarted, your printer will have been reset to factory default settings.

How do you fix a HP printer cartridge error?

Installing a new cartridge can resolve ink-related errors.For best results, replace the cartridge with a genuine HP cartridge. … Open the door or lid to the cartridge access area. … Remove the cartridge indicated in the error message, and then insert the new cartridge into the slot.More items…

What do you do if your printer doesn’t recognize the ink cartridge?

Try replacing the old cartridge with the new one and see if the printer will recognize the cartridge. If that doesn’t work, remove the new cartridge and place it in a safe place and surface so there won’t be further damage. Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes.

How do I get my HP printer to recognize ink cartridges?

Why are the Ink Cartridges not detected?Remove the new ink cartridge from the printer.Turn off your HP printer and detach its power cord for 10 minutes.Reconnect the power cord but don’t turn on the power button just yet.Reload the new ink cartridge back into the printer.Dec 29, 2020

How do I override my HP ink cartridge?

How to Override HP printer empty cartridgeGo to the printer control panel and press the “Menu” button.Using the Left and Right arrow buttons, go to the “Service” setting and press “Enter.”Using the Left and Right arrow buttons again, go to “Restore Defaults” and then press “Enter.”More items…•Feb 26, 2021

How do I clear error messages on my HP printer?

In some cases, a printer reset can clear the error message.Turn the printer on, if it is not already on.Wait until the printer is idle and silent before you continue.With the printer turned on, disconnect the power cord from the rear of the printer.Unplug the power cord from the wall outlet.More items…

How do I clear the HP check cartridge error code?

How to Clear an HP Check Printer Cartridge Error CodeTurn on the printer and open the cover where the ink cartridge is located. … Place the ink cartridge back in the carriage. … Turn the HP printer on. … Turn on the printer and open the cover where the ink cartridge is located. … Remove the cartridge and use a clean, lint-free, dry cloth to gently wipe the contacts.More items…

How do I reset my HP ink cartridge?

How to Reset HP Toner Cartridge ChipsSwitch the printer off.Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. … Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing.More items…

How do you trick your printer into thinking it has ink?

All you need to do is use a paper clip to press the reset button in a small hole which should be near the electronic circuitry on the ink cartridge. If the reset button isn’t there, then you can always try covering the gold or copper contact points with a transparent scotch tape.