Question: How Do I Fix My HP Printer That Won’T Print?

How can you tell if a printhead is clogged?

HP printheads clog periodically as small amounts of ink or dust dry up and collect in the nozzle.

Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again.

Printheads clog due to infrequent cartridge use..

Why won’t my printer print even though it is connected?

The printer you plugged in to a USB hub on a system with too many peripherals to accommodate a direct connection may refuse to work that way. … Shut down the printer and restart to reset on the printer end. If that is not the issue, check the connection at your wireless router and reset the router as well.

Is there a reset button on HP printers?

The control panel will display SELECT LANGUAGE. Press (Down Arrow) button until control panel displays COLD RESET. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.

How do you reset HP printer?

1 Restore DefaultsFrom the screen on your printer, navigate to Setup.Tap Tools.Tap Restore Defaults.Tap Yes.The printer will restart.Once restarted, your printer will have been reset to factory default settings.

How do you unclog a print nozzle?

If they’re on the cartridge, and the cartridge is mostly empty, you can just replace it. The new nozzles will obviously be unclogged. Seriously clogged nozzles can be cleared with some isopropyl alcohol and another run through the clean cycle.

Why is my HP printer not printing from computer?

SOLUTION 1: Check HP Printer Status 1) Make sure your HP printer has enough paper in the paper tray. If there is paper then make sure none of it is stuck or jammed in the paper feed. … Consult your specific printer’s manual for how to check the ink levels or toner level for your printer.

How do I troubleshoot my HP printer?

Download HP Print and Scan Doctor.Run HPPSdr.exe from the download location on your computer.Once HP Print and Scan Doctor is open, click Start, and then choose your printer. … Depending on the problem, click either Fix Printing or Fix Scanning.Test results are displayed with icons.

How do you troubleshoot a printer problem?

Troubleshooting offline printer problemsCheck to make sure the printer is turned on and connected to the same Wi-Fi network as your device. … Run a printer power cycle. … Set your printer as the default printer. … Clear the print queue. … Reset the service that manages the printing queue. … Remove and re-add your printer to your device. … Restart your PC.

Why is my printer printing blank pages when it has ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. … Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

What do I do when my HP printer is offline?

Windows 8, 7Search Windows for devices, and then click Devices and Printers from the list of results.Right-click the name of the HP printer that is active (not grayed out), and then select Set as Default printer.Try to print. If the printer remains offline, continue to the next step.

Why does my HP printer keep going offline?

There are several reasons why your HP Printer is displaying the offline status again and again and these reasons are mentioned below: Power or cabling related issues. Network connectivity problems. Faulty or outdated drivers.

How do I do a hard reset on my HP printer?

Performing a hard reset on the HP printerVerify that the printer is turned on.Open the printer and remove both cartridges.Unplug the power cord and other cables from the printer.After 10-15 minutes, plug the power cord and other cables in to the printer.Open the printer and reinstall both cartridges.Switch the printer on.Print a test page.

How do I get my HP printer cartridges to work again?

We show you some simple and basic steps to rescue your ink cartridges in case their nozzles are dried up.Requirements. … Method 1: Clean using an Ear Bud. … Method 2: Dip in warm water. … Method 3: Clean with damp lint-free cloth. … Method 4: Keep under warm running water. … Method 5: Dip in Isopropyl Alcohol.Aug 28, 2012

How do I restart the print spooler?

Restart the Print SpoolerClick Start, type “Services. … Double-click “Printer Spooler” in the Services list.Click Stop and click OK.Click Start, type “%WINDIR%\system32\spool\printers” in the Start Search box and press Enter, delete all files in this folder.Click Start, type “Services. … Double-click “Printer Spooler” in the Services list.More items…

What do I do when my printer is printing blank pages?

What to do if your Printer is printing Blank Pages?Fix # 1 – Restart your Printer.Fix # 2 – Resolve Ink / Toner Cartridges Problems.Fix # 3 – Unclog the Print head (Automatic Cleaning)Fix # 4 – Unclog the Print Head (Manual Cleaning)Mar 1, 2021

Why is my HP printer not printing even though it has ink?

If it’s not the cartridge and not the printhead, it’s possible that the problem is with the software/printer driver. Tweaking the paper settings is one way to solve the problem. Try changing the printer driver settings to select “glossy photo paper” as this may trigger the printer to start printing again.

How do I get my HP printer back online?

Go to the Start icon on the bottom left of your screen then choose Control Panel and then Devices and Printers. Right click the printer in question and select “See what’s printing”. From the window that opens choose “Printer” from the menu bar at the top. Select “Use Printer Online” from the drop down menu.

How do you fix your HP printer when it says offline?

Verify that your printer is not in Use Printer Offline mode. Select Start > Settings > Devices > Printers & scanners. Then select your printer > Open queue. Under Printer, make sure Use Printer Offline is not selected.